Standard Maintenance Services
What They Are and Why They Matter
Why Keep Up with Standard Maintenance
In addition to regular oil changes, we recommend these other standard maintenance services. We want to make sure that these aspects of your vehicle stay in the best condition possible, and the following services are geared towards slowing down the wear and tear on the important pieces of your auto.
4-Wheel Rotation
What It Is
Moving all four tires from one position to another (e.g., front-to-back or cross-pattern) based on your vehicle’s drive system.
Why It Matters
Front and rear tires wear down at different rates due to steering, braking, and drivetrain forces. Regular rotations ensure even tread wear, extend tire lifespan, and maintain optimal traction.
4-Wheel Alignment
What It Is
Precision adjustment of the vehicle’s suspension angles (camber, caster, and toe) back to original factory specifications using specialized optical equipment.
Why It Matters
Potholes and curb impacts pull wheels out of alignment over time. Beyond causing uneven tire scrubbing and steering pull, misaligned wheels put continuous, uneven stress on suspension components like ball joints, tie rod ends, control arm bushings, and wheel bearings—leading to premature component failure and costly repairs.
Battery Replacement Service
What It Is
Safe removal of the old 12V battery, cleaning of terminal connectors, installation of a fresh battery meeting OEM cold-cranking amp (CCA) specs, and a final charging/starting system diagnostic check.
Why It Matters
Prevents unexpected breakdown scenarios. Modern automotive batteries typically degrade after 5 to 7 years, leading to slow engine cranks or sudden electrical failure.
Brake Fluid Service
What It Is
Flushing out old, degraded brake fluid from the master cylinder and lines, then replacing it with fresh, high-boiling-point fluid while bleeding air from the system.
Why It Matters
Brake fluid is hygroscopic (it naturally absorbs moisture from the air). Over time, water contamination causes internal rust in hydraulic components and lowers the fluid’s boiling point, which can lead to a soft or spongy brake pedal, rusted lines, seized calipers + more.
Cabin Air Filter Replacement
What It Is
Replacing the pleated air filter situated behind the glovebox or cowl area that purifies incoming outside air.
Why It Matters
Traps pollen, dust, soot, and allergens before they enter the passenger cabin. A clean filter keeps interior air fresh and reduces strain on your HVAC blower motor.
Engine Air Filter Replacement
What It Is
Replacing the primary engine intake air filter housed in the airbox.
Why It Matters
Prevents dirt, sand, and road debris from entering the engine cylinders. Restores clean airflow, helping optimize fuel efficiency and engine responsiveness.
Engine Coolant Flush & Refill
What It Is
Draining the degraded radiator fluid, chemical flushing to clear rust/scale buildup, and refilling the system with new OEM-spec coolant mixed to the proper freeze/boil protection ratio.
Why It Matters
Coolant additives break down and become acidic over time, leading to internal corrosion of the radiator, water pump, and heater core. Fresh fluid prevents overheating in summer and freezing in winter.
Full Synthetic / European Oil Service
What It Is
Draining old engine oil, replacing the oil filter with a high-capacity unit, and refilling with premium full-synthetic oil tailored to high-performance or European engine clearances (ACEA/OEM specifications).
Why It Matters
Full-synthetic oil resists thermal breakdown, maintains viscosity under extreme heat, and provides superior lubrication to critical internal engine components during cold starts.
Power Steering Fluid Service
What It Is
Flushing old power steering fluid from the reservoir, pump, and rack/pinion assembly, then refilling with fresh fluid and conditioners.
Why It Matters
Removes metallic debris and oxidation that cause seal leaks, pump noise, and stiff steering response.
Transmission Drain and Fill
What It Is
Draining degraded fluid from the transmission pan and refilling it with fresh automatic or manual transmission fluid to the proper operating level.
Why It Matters
Removes suspended metallic wear particles and replenishes friction modifiers, ensuring smooth gear shifting and preventing clutch pack slip or valve body wear.
BG Specialty Performance Services
BG Air/Fuel Induction Service
What It Solves
Removes stubborn carbon buildup from intake valves, throttle bodies, and combustion chambers.
Key Benefit
Restores lost horsepower, eliminates rough idling, and improves throttle response.
BG 44K Fuel Treatment
What It Solves
Highly concentrated fuel system cleaner added directly to the fuel tank.
Key Benefit
Cleans fuel injectors, valves, and combustion chambers in a single tankful of gas.
BG Driveline Service
What It Solves
Cleans and replaces fluid in front/rear differentials, transfer cases, or manual transaxles and transmission.
Key Benefit
Protects heavy-duty gears under high load and prevents differential chatter.
BG Performance Oil Change Service
What It Solves
Combines a professional engine flush additive (BG EPR) with high-grade Full-Synthetic European oil.
Key Benefit
Dissolves sludge deposit build-up, restores cylinder compression, and neutralizes oxidation.
Book Your Appointment for Standard Maintenance Services
At Werner’s Import Automotive, we’re dedicated to maintaining your European or Asian import vehicle with the utmost care. Book your standard maintenance service online or over the phone by calling (515) 259-0122.